24/7 Customer Support logo
24/7 Customer Support logo

All articles

Turning on & connecting to your Mevo+Updated 2 years ago

To turn your Mevo+ on, Press & Hold the silver button located on top of the device for approximately 2 seconds until the blue light illuminates on the device. Your Mevo+ will take approximately 10 seconds or 7 brief “beeps” to boot up. Once boot up is completed, the Mevo+ will beep twice and the first light will remain solid blue. 

Mevo+ connects to all devices using it’s own WiFi signal. Once your Mevo+ is turned on, go to the WiFi settings on your phone or tablet, and search for a network that matches the Serial Number printed on the back of your Mevo+ starting with “FS”. 

NOTE: YOUR MEVO+ WiFi PASSWORD IS YOUR SERIAL # LESS THE “FS”. FOR EXAMPLE, IF YOUR SERIAL # IS FS M7-001234, YOUR MEVO+ WIFI PASSWORD IS M7-001234 

IMPORTANT: Your Mevo+ is not connected to the Internet. You may receive a warning on your device that you are “Connected without Internet”. This is correct. Click “ok”, “keep wifi connection” or similar to stay connected to your Mevo+ WiFi.

Was this article helpful?
Yes
No